Welcome to Ruian Benyue Machinery Co., Ltd.
Popular search: Coating machine Multifunctional Coating Machine Protective film coating machine Composite machine Coating compound machine
product
Contact information
Ruian Benyue Machinery Co., Ltd.
Contact person:MS.Sala
Tel:+8657765165266
Fax:+8657765186255
Contact number:+8613958857367
Website:: www.benyue-china.com
Address: No.181,Development 2nd Road Economic Development Zone, Ruian City, Zhejiang, China
Company newsCurrent position: Ruian Benyue Machinery Co., Ltd. > News > Company news >

How to Clean Coating Machine

时间:2019-05-11 11:41   作者:admin 点击:
How to clean the coating machine?
 
Coating knife head cleaning: dry gauze is used to wipe after the equipment is heated. Roller shaft cleaning: stainless steel rollers are wiped with clean dry gauze dipped in 75% alcohol. If glue is found on the surface, use dry gauze dipped in 1620 solvent/ethyl acetate solvent to wipe; glue on the surface of rubber rollers should not be treated with organic solvent to avoid damaging the rubber rollers, and strong adhesive curing should be used to remove it. Exterior surface of equipment; Cleaning method: Use clean dry gauze dipped in 75% alcohol to wipe. Batch cleaning: hot melt adhesive coating machine rubber box and hose cleaning (applicable to the replacement of glue type and coating method): after emptying the original glue, add new type glue 2-3 Kg, heat to complete melting, then all empty, then add new type glue, after complete melting at least 1 Kg to start production.
 
 
 
Cleaning of coated knife head (suitable for changing glue type and coating method): Dry gauze is used to wipe after equipment is heated. Roller shafts coated with compound position; use clean dry gauze to wipe surface dust; if glue is found on the surface, do not use organic solvents to deal with it, so as not to damage the rubber roller shafts, should use a strong adhesive curing adhesive to remove.
 
 
 
Cleaning of corona device: After confirming power off, wipe with clean dry gauze dipped in 75% alcohol. Non-fixed cycle cleaning of hot-melt adhesive coating machine: the coating head of hot-melt adhesive coating machine should be cleaned when the coating method and the grade of glue change. When cleaning, the coating head should be removed before the glue does not solidify, and the coating head should be wiped clean with dry gauze dipped in 1620 solvent. During the production process, the overflow glue must be wiped off with clean gauze when the equipment starts after shutdown. Clean the filter screen of rubber box of hot melt adhesive coating machine for half a month. Hot Melt Adhesive Coating Machine Coating Head Filter Cleaning. After more than one month of shutdown, all coating equipment should be cleaned in accordance with the above daily, batch change, half month and non-fixed cycle cleaning content and requirements before putting into use; for hot-melt adhesive coating machine rubber box, after emptying the original glue, the residual glue must be dissolved by adding about 30kg white mineral oil, after emptying, the remaining glue must be dissolved again by adding about 30kg white mineral oil, and completely discharged. Stand by when you are free.
copyright 2016 Ruian Benyue Machinery Co., Ltd. all right Technical support:Hangzhou Nanhao Network Technology Co., Ltd.
Contact person:MS.Sala Contact number:+8613958857367 Tel:+8657765165266 Fax:+8657765186255
address:No.181,Development 2nd Road Economic Development Zone, Ruian City, Zhejiang, China
Website Record No: Zhejiang ICP Record No. 17000376-1 Company Website:http://www.benyue-china.com